View Full Version : Looking For Web Shooter

03-01-2007, 09:46 AM
I have an event coming up at the end of March and I am looking for one of those cool glue-stick web shooter guns. Anybody have any info about where I could pick one up cheap? Or where is the best place to get cheap glue sticks? I saw that a lot of booths had them at TW last week. I did not figure out that I needed one until today.

Any help would be appreciated.

03-01-2007, 09:52 AM
I believe GhostRide has some.


03-01-2007, 10:11 AM

03-01-2007, 10:30 AM
Minion's Web is the ONLY place in my opinion to get glue sticks, and the most powerful webbers. I have 3!!!!

Jim Warfield
03-01-2007, 10:47 AM
Order a Web-Shooter From Mr. Tuxedo Industrys and receieve a really big spider with it...wait a minute, THAT is the web-shooter, a really big spider.
I lie. These spiders are so big they don't use webs, really, they just run down their food. Listen. Hear those clomping little footsteps from 8 feet?

damon carson
03-01-2007, 12:45 PM
I have a web shooter/ cobweb maker from Terror by Design it works pretty good but probably doesnt work on as large a scale as the newer style webshooters. Oh try the cobwebs in a can by Ghostride they work great. Sneak them into some neat freaks house and let the fun begin! :twisted:

03-01-2007, 01:00 PM
The only problem with most cobwebs in a can are that they are not fire inspection safe. Heck, most hot glue isnt either. That is one reason I went with Minion's Web, all their glue is guranteed fire safe.

03-01-2007, 01:17 PM
Minion's Web is the ONLY place in my opinion to get glue sticks, and the most powerful webbers. I have 3!!!!

after TW I'm seeing how much our haunt lacks in detail and I desire to change that. However, we won't be needing very many webs this year. Do you think the most economical one Cory has available would fit our needs?

03-01-2007, 02:12 PM
We do a Halloween Party every year and really deck things out. I've been looking for a webber too and I like the prices on MInion Web. May I ask what model someone would recommend for a very large 1 room warehouse/garage type building where we do our party? The size is roughly 800 sq feet maybe?

03-01-2007, 02:24 PM

I would recommend the second from the top of Corey's line. As Corey himself put it, the top of the line will web everything :lol:

03-01-2007, 02:39 PM
WWW.MINIONSWEB.COM Has the webber for any job!!!!! Not to Mention Fantastic customer service, a friendly although slightly mishapen face......
Corey is the Man with the Webber for you!

03-01-2007, 04:10 PM
Minion's Web is the ONLY place in my opinion to get glue sticks, and the most powerful webbers. I have 3!!!!

after TW I'm seeing how much our haunt lacks in detail and I desire to change that. However, we won't be needing very many webs this year. Do you think the most economical one Cory has available would fit our needs?

I would not recommend any one going below the model c, which is the second from the bottom, approximately $100. It works good, and unless it's under 65 degrees, you'll have no problem. The colder you have to shoot webs in, the better the gun you need. I was unable to shoot webs in 50 degree weather with the c. Just remember, the better the gun, the easier it is too use. IF you can't afford the D, which is the most powerful one, at least go with the ccl. As soon as I get the money I am getting the D. If you aren't doing that many, and it will be above 65 degrees, you can go with the c for $100.

03-01-2007, 09:52 PM
Shadows Edge seemed like they had some pretty nice guns. Everything was a bit cheaper than Minion's Web, but also not quite as good of quality. So if you are working on a tight budget this would work. Shadows's guns might not work as fast as Minion's, but it will get the job done.

I should recieve my stuff from them pretty soon, so I will let ya'll know my results with them pretty soon.

03-01-2007, 10:32 PM
Thanks for the good advice all! I love the haunt community...thanks again.

Frighteners Entertainment
03-02-2007, 09:01 AM
I've got 10 cases coming in around the end of July first of August.
I'll be doing a pre-order of $38.99.
After the end of July for $45.99.

Here's a short video of it in action:

damon carson
03-02-2007, 09:06 AM
Do you have the url for Shadows Edge?

03-02-2007, 11:09 AM

You are going to have soooo much fun supporting that product, the returns, the time on the phone trying to teach folks to use it, etc. Once they cant get it to do what they want, they will return it, gonna resell a used gun?

Whats the warrantee? Whats this guys return policy? Will he support your customers? Whats money is your time worth? What is customer satsfaction worth?

Profit margin is your motive, we have discussed this repeatedly, you can buy a 25 buck gun, and waste an hour on support per unit before they want to return it. or buy it for 28 in nice packaging and metal components not plastic that that will break

Since I have the patent pending going on 6 years now, dont you think the minute it is approved, I wont issue a cease and desist order thru my patent attorney, who developed a wonderfully broad protective description?
__________________________________________________ ________

Empress and Rogue,

As far as your needs, just call me or email me direct, I can fit you to a gun to meets your needs. (csminions@minionsweb.com I can give you my cell number off forum) Details like size, indoor(heated ot not) or outdoor (a geographic location) , days open, time to set up, who and how many folks will operate it - are all important.

Roque for an 800 sq ft haunt if indoors room temp at 70, a gun like that one of our MW1 will piss you off. The MWD will take you less than an hour depending on how finessed you desire to be. MW1, 4 plus hours, MWC, 2-3 hours, MWCCL >2 hours. Its another story if you are outdoors, or the inddoor space is unheated.

If you have PLENTY of time to shoot webs, you can get by with it, but you will be limping along. I would go to the MWC, it has higher output per hour to move along faster, cools off less, so you can work for longer durations without having to allow the gun to reheat. Use the same idea as you go up the product line.

I try to explain this over and over folks.
A cheap gun is great if you want to be cheap, but with EVERY gun, there is some learning curve involved. The lower the price the longer the curve, the harder it is to be consistent and fine with the webs. Some folks just cant get the low price models to work.

Do you buy cheap tools and become unhappy with the results wasting time to make it look as you hoped? Or spend more money and less time trying to make it work, with the results you expect?
__________________________________________________ _________

I make it a point to offer the lowest practical cost webbers.

Jeff, you didnt ask anything about a 10 case wholesale order with me, which I probably would have disuaded you from anyhow - you talked about a dozen units, not worth the hassle - had you asked for a retail packages on 250 units (box - not a some minimal card/blister pack) I wouldnt have ignored your inquiries.

The guy selling these kept sending folks up to me (yeah sneaky aint he) to try to explain operation, they asked for wholesale prices (competative with these in quantity) and I explained exactly the issues, learning curve, usage, and support. They then ordered a better overall unit from me, since I actually had information, would hand them any and all gunns, and would be there for them.

They all chose to instead order one or 2 D models and to rent a package of compressor, hose and webber. 6- 8 rentals, and their expense is covered, and the support is nearly nil. Initial investment lower, support cost lower, profit WAY HIGHER.

I did hundreds of 30 second lessons last week, handing the gun to the person after, and all of them were making webs in 30 seconds, fine, simple webs, shooting them 30 ft, and making heavy webs in moments should they desire. They said that is they dont spend 10, 20 30 minutes per teaching a customer, and instead can spend 30 seconds, its worth every cent.

One pointed out that after a few rentals the customers will be more inclined to buy one of the guns for themselves, at a real profit margin.

Another pointed out that they would make additional profit on the glues, since they have a captive audience at that point.

My other favorite is this guy is supplying what, 2, "webcaster" sticks, are they fire safe?? are the food safe?? MSDS sheets available??

You can find sticks at other sources, and they may be around now and again, I have the simply largest source, I have in excess of 3000 pounds annually made explicitly to my specs. Maybe a little cheaper, but what does safety and peace of mind cost?

Talk to me, then make an educated decision.
A haunter making quality and safe items for his FELLOW haunters.

BTW, Jeff, the vid doesnt work. Warning signs of things to come?

Webs so real, spiders think its home.

Frighteners Entertainment
03-02-2007, 11:52 AM
Hey Corey, it's never too late to talk!
And I fixed the link.


03-02-2007, 11:57 AM
Do you have the url for Shadows Edge?

No I sure don't, and I wont be able to get back to my info for a while.

03-02-2007, 12:55 PM
Hey Corey, it's never too late to talk!
And I fixed the link.


I don't see a video.

Frighteners Entertainment
03-02-2007, 12:58 PM
It should be the first shockwave block.
On the screen it will say "click here to play movie"

03-02-2007, 08:24 PM
I see the vid.

That gun in different iterations will be available from 6 chinese vendors and especially Fitco next year as soon as the factory knocks them off and will be cheaper and cheaper I hate to say, this is why I refuse to produce them in China (remember I have the inroad with Jasmine and my inlaws there)

The webbers are American made, hand made, quality made, actually patented pending.

Only the entry level gun is a china made, the rest are US and Europe manufacture.

I noticed he use a good bit of my description verbatim in his video.

Yes, of course we can talk.
Let me know when is a good to chat on the phone.

03-06-2007, 02:18 AM
Thanks for all the replies everyone. I think I'll be going for the C web shooter since I'll only be doing this for my Halloween Party and just in 1 big room so the time involved to do it isn't too big of a deal. I'll be ordering very soon. Thanks!

03-06-2007, 07:28 AM
Glad to help.
BTW, take advantage of show prices while you can, which will run thru the 11th currently.

Jeff, you gonna call me or what?
if so, hold of til next week, I am slammed prepping the nursery, someone is getting mean.

03-06-2007, 07:55 AM
I got my stuff ordered from Corey, and I can't wait to use them. I have a gaming event at the end of March every year, and the web-shooter and boomer is going to come in handy.

Thanks to everyone for their help in this thread, and a big thanks to Corey for being so AWESOME to order from.