Drop Panel Design –
Using a standard 4x8 sheet of plywood 1/2" Thick Frame the outter edge with 2x4.
Then going in 1 foot from either side down the length install a second set of 2x4's (making a track for the panel to slide in)
Cut a 2'x2' hole then on a new peice of plywood cut a panel larger than the hole.
Screw two 2x4 's along the edge to guide the panel to the floor (On the inside of the track)
I also screwed one 2x4 to the bottom to take hitting the floor as to not chip up the plywood.
Brookdale Campground Haunted Halls
Kozy Rest Campground Haunted Hay Ride
ScareHouse Pittsburgh, Pa (Actor)
Designer & Technical Director