HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: Ramp question

Results 1 to 4 of 4
  1. Default Ramp question 
    Join Date
    Nov 2011
    I have to ramp up to a height of around 36"-42" for a scene. This will not be a wheelchair accessible area. What kind of incline can I use that is still comfortable to most patrons? I may also make it narrow in parts on the way up to play on claustrophobia fears. On the way down I will probably hang stuff in the way to create darkness before the next scene. I was thinking about a 2/12 slope ramp? 1/12 seems flat and 3/12 might seem like your out for a hike. Has anyone ever used more lineal foot on the accent side of things and less on the descend or vice versa?

  2. Default  
    Join Date
    Mar 2010
    Well..that's one way to not pass your inspection.

    Nationally, (although some get away with it) all ramps must be handicap accessible and have a 1 inch rise for every 12 inches. That's the regulation on a federal level.

    Good Luck!

  3. Default  
    Join Date
    Nov 2008
    Des Moines, Iowa
    Actors and chainsaws should scare patrons.

    Steep ramps and the possibility of falling/injuries should not.

    Stick with the 1/12 code to be safe and smart.

  4. Default  
    rfsystems Guest
    The only way you could get by without following code is if you have an alternate path around the obstacle or if it can be considered a piece of playground equipment that falls under the size specs that require inspection.

    Stick to the code, and play it safe.

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts