HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: Air/water blaster question

Results 1 to 7 of 7

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Default Air/water blaster question 
    Join Date
    Aug 2003
    Clinton TWP, MI
    We are getting ready to install our new water blasters that we got from TW. We've never had any before and we where just thinking. What do you guys do to prevent the floor from getting slick? We have cement floors and after running these blasters for 5-6 hours a night. I'm sure water will start to collect on the floor and we are worried about possible slip and falls. What would you suggest? Thanks!!
    ~Bill Mlinac
    The Deadland Haunted House

  2. Default  
    Join Date
    Jul 2010
    Hartford CT

    You need a place for water to go/drain or you could have bigger issues. Might raise the floor up and inch so as to have a "pool" where water can collect and then pump it outside or back into the tanks. Otherwise the water could find it's way into another area where you don't have anti slip mats and then u do get sued.
    Last edited by HauntedPaws; 08-03-2013 at 08:35 PM.

  3. Default  
    Join Date
    Jul 2010
    Columbus, OH
    We didn't have a problem with the water reaching the floor; it was shot directly on our customers! Mostly a fine mist anyway that was gone by the time they exited the haunt.


  4. Default  
    Join Date
    Jul 2012
    we have 4 water blasters and have never had a problem with pooled water. Don't need to drown the customers, enough to mist them and let the mist and air do the work. If water is pooling, the blaster is putting out too much water.

  5. Default "Survey Shows!" 
    Join Date
    Aug 2003
    Ravens Grin Inn, 411 carroll st.mount carroll ill.
    Do haunt customer like having water sprayed on them?
    A short while ago some of my customers told me they had water sprayed in their faces and this was one of the reasons they did not enjoy that haunt and will never go back to it. ??

  6. Default  
    Join Date
    May 2007
    Columbia, SC
    We use the rubber mats every year as well. We now don't drench our customers but the first year I used the sprayer it didn't take much for the floor to pool with water despite the mats, and it even began running under the panels into different scenes. NOT GOOD. So yeah, unless you're willing to build heightened floors and drains then it probably is best to lower the output.
    O'Shawn McClendon
    Creative Chair -- Operator: Cayce-West Columbia Hall of Horrors

    One mans junk is another mans kick-ass new prop...






Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts