HauntWorld Home - Forums Home - Live Chat - Find Haunted Houses - Hauntworld Magazine - Haunted House Supplies - America's Best Haunts - Find Vendors
Haunted House News - Haunted Tradeshows - Join Hauntworld Facebook - Hauntworld Twitter - Advertise - Contact Us

Thread: Mig Welder?

Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. Default  
    Join Date
    Feb 2008
    I ended up buying a LINCOLN SP135T with a gas hook up. I got it from weldmart online for $444. A great deal for that welder. Thanks for the tips.

  2. Default  
    Join Date
    Apr 2006
    Southern CA
    Quote Originally Posted by RJ Productions View Post
    While you're discussing welders how about perferences?
    Do you prefer gas shielding or the flux wire (no gas)?
    Pros & Cons?
    You can get a small, flux core welder real cheap, and there is no extra cost with buying a regulator/guage setup and tank. If you do any serious welding, the extra cost of flux-core wire outweighs the initial savings.

    Welding with flux core creates a lot of smoke, so it is difficult to see the bead. It creates a lot more splatter, and you have to chip off the slag that coats the bead when you are done.

    MIG (with gas shielding) produces little smoke, and little splatter. There is no slag to clean up. Overall, the welds are much cleaner.

    A cursory Google search suggested that you can get better penetration with flux shielding. It seems to me that if you are welding anything bigger than 1/2" plate, you should probably be using a robust stick-welder anyway.

    I use .030 wire and steel mix gas (Argon/CO2) for pretty much everything I weld.

    I also have a Miller auto-darkening hood that works great. I used to have a cheaper auto-darkening hood that would often fail to work if it didn't get a chance to charge (worked off solar power.) I got rid of it because I don't want to risk getting flash-burns. The Miller runs on battery, but uses solar (from the weld arc) to charge the battery.

    I do a LOT of welding, so having reliable equipment is very important to me.
    Spinning Tunnels www.spinningtunnel.com

  3. Default  
    Join Date
    Aug 2003
    Ravens Grin Inn, 411 carroll st.mount carroll ill.
    I knew that I used a "Stick" welder for some reason...penetration!
    (It's all about Penetration!)

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts