Anybody have any experience with a Webcaster Gun? A bit trickier then I thought it would be to get realistic results. Seems like air is all on or all off. Only the last 1/4 of the dial actually does anything. Normal or did I get a bumb one? Gonna put a flow control in line and leave knob full open to see if that helps. Haven't played w/ pressure yet. At 90psi per directions. Go from blowing chunks to nothing, the gun that is. Any tricks anybody can share? Thanks in advance.
Announcement
Collapse
No announcement yet.
Webcaster Gun Help
Collapse
X
-
Try adjusting the air pressure. it worked for us. You do have to play with it a little to see diffrent results. You can spray webbs a long ways or up close. We adjust the air pressure to get the results we like. If it is clumping up maybe the glue isnt getting hot enough??? Like all scenery techniques it takes practice to get the desired results. Try the air adjustment first then go to the gun heat if things dont get better. If it's still not working properly call the manufacturer and ask them for any ideas. Our first webgun had a bad heater and it didnt work properly so this could be your issue also. Just some things to try or think about. Greg
-
Glue
Originally posted by N2SPOOKINU View PostTry adjusting the air pressure. it worked for us. You do have to play with it a little to see diffrent results. You can spray webbs a long ways or up close. We adjust the air pressure to get the results we like. If it is clumping up maybe the glue isnt getting hot enough??? Like all scenery techniques it takes practice to get the desired results. Try the air adjustment first then go to the gun heat if things dont get better. If it's still not working properly call the manufacturer and ask them for any ideas. Our first webgun had a bad heater and it didnt work properly so this could be your issue also. Just some things to try or think about. Greg
I have a similar web gun and 90 PSI seems a bit higher than what I've used. First, (without air on) I would make sure gun is producing liquid glue. Then, I would start with the valve off and slowly increase the flow. There's a balance between letting the glue melt and cooling it (and tip) with the air flow. The whole thing did take some experimentation. Looks much easier in video!!!
Comment
-
sounds to me like it's not getting hot enough either. I would get a more powerful gun from www.minionsweb.com . I own all their guns and they are all amazing depending on what and where I am working.Brian Warner
Owner of Evilusions www.EVILUSIONS.com
Technical Director of Forsaken Haunted House www.Forsakenhaunt.com
Mechanical Designer (animatronics) at Gore Galore www.Gore-Galore.com
Comment
-
I haven't used this product so I don't know, but I'm encouraged to hear it uses a glue. The last one I used looked great, but the webs were highly combustable and I didn't want to take the fire risk. Sometimes, haunt companies produce props that the fire marshall would test with a lighter and shut you down then and there! You can treat many props with fire retardent, but the spray won't work well on spider webs! But if you have a web gun that produces webs that will not burn, that would be a nice item indeed. Has anyone tested it with fire?
Comment
-
Originally posted by monsterwax View PostI haven't used this product so I don't know, but I'm encouraged to hear it uses a glue. The last one I used looked great, but the webs were highly combustable and I didn't want to take the fire risk. Sometimes, haunt companies produce props that the fire marshall would test with a lighter and shut you down then and there! You can treat many props with fire retardent, but the spray won't work well on spider webs! But if you have a web gun that produces webs that will not burn, that would be a nice item indeed. Has anyone tested it with fire?Brian Warner
Owner of Evilusions www.EVILUSIONS.com
Technical Director of Forsaken Haunted House www.Forsakenhaunt.com
Mechanical Designer (animatronics) at Gore Galore www.Gore-Galore.com
Comment
-
Fire Proof Cob Web Glue
Not all hot glue is the same, but most all Hot melt glue used for cob webbing will pass a fire marshalls vertical flame test, (purchased from a haunt vendor or a craft store- it doesn't matter).
The melting webs will simply extinguish the flame when applied. Check the MSDS sheet on the glue and it should read that glue won't ignite until it reaches in excess of 1000 degrees. Thats safem (and proof enough), for inspectors from CA to NY, as far as our clients have been telling us for over 10 years.
Comment
Comment